Q: Q: No brake lights

asked by on

I have no brake lights.

Failed brake lights can be caused by many things. The problem can be as simple as the need for new bulbs, to more complex wiring problems, or a need for a new stoplight switch. I would recommend having a professional technician, such as one from YourMechanic, look at the vehicle to diagnose your brake light issue and make the appropriate repairs.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: No brake lights

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: my 1989 corvette anti lock light comes on the car will start then dies

Hi Kristine. Thanks for reaching out to us today. If you're referring to the anti-lock brake light on your Corvette, this typically does not impact the operation of the engine or would cause it to start then shut off. However,...

Q: Car loses power around 30mph

Hello there, thanks for writing in. Many different faults can cause your 2002 Chevrolet Blazer to lose power. The most common would be spark plugs, wires, fuel pump, fuel filter, alternator, shift solenoid, low transmission fluid, or the battery. A...

Q: Oil pressure dropping

I hate to be the bearer of bad news, but it sounds like your engine is at about the end of its useful life. If a motor seizes, the piston has become so hot and expanded that its stuck in...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...