Q: My nissan murano overheated and stalled and now it won't start.

asked by on

My car overheated and then stalled. Now it won't start. What do i do next?

My car has 133000 miles.
My car has an automatic transmission.

Overheating can be caused by a number of things such as low coolant levels, a faulty thermostat, a clogged radiator or a failing coolant fan switch. As you may know the coolant fan switch helps to maintain the proper coolant temperature by turning on and off at specific temperature thresholds. When this switch is not working properly, this can cause the fans to come on intermittently, all the time or sometimes not at all. When this happens you will notice a temperature spike and drop occasionally as the fan comes on and off. When your thermostat is not working properly or is stuck closed, this will not allow the coolant to properly circulate through the engine, which may cause the engine temperature to fluctuate erratically or in some cases just remain hot. You may also have a water pump that is beginning to fail. Water pumps often times will begin to produce a bit of a whining sound when they are starting to fail. A common problem also associated with this is the water pump may begin to leak around the water pump shaft due to the seal being damaged. In addition to leaking around the pump, you may have a leak elsewhere in the cooling system coming from one of the hoses going to or from the radiator. Lastly, you may have a failing cylinder head gasket allowing coolant to leak from the water passages into the cylinders resulting in the coolant being burnt in the combustion chamber with the fuel. If this is the case, you may also notice a bit of white smoke coming from your exhaust which is a product of the coolant being turned into a steam like vapor. I would suggest having an expert from Your Mechanic come to your home to diagnose your cooling system.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. My nissan murano overheated and stalled and now it won't start.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Dealer advised during brake fluid flush that fluid has congealed in tank. Tank needs to be replaced unless a way can be found to r

Brake fluid can congeal in vehicle braking systems but it is not common. The contaminants that cause this vary from moisture to system materials wearing off to adding mistaken fluids to the brake fluid, such as engine oil. The remedy...

Q: Car will not start after replacing battery and alternator

The support bracket is a structural element and therefore must be installed to maintain proper alignment of the alternator. However, as far as its temporary omission being a possible cause of the no start, it has nothing to do with...

Q: Locked solenoid valve

The code is for the lock up control solenoid circuit of the transmission or transmission module. The first test indicated for the code is to clear the code and see if it returns. If it does not return, then it...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.