Q: My back up camera shows a blue screen

asked by on

My back up camera shows a blue screen

My car has 93000 miles.
My car has an automatic transmission.

Hi there. It sounds like the camera has failed or has lost connection. The cameras for these systems are prone to failing and it does happen often. To check for a loose connection remove the trunk lid cover and inspect the camera harness to make sure it’s plugged in securely. If it is plugged in securely, then the camera has failed or the wire may have an open circuit. Checking the AV wire for the camera requires proper diagnostic equipment. I suggest having a qualified technician perform an inspection to avoid replacing unnecessary parts. Your Mechanic has several available technicians that can assist you with an electrical component is not working inspection.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1,000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. My back up camera shows a blue screen

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: getting a constant knocking noise when the ride is bumpy

If the struts are not securely attached to the strut mount that is bolted to the top of the spring tower, and/or bearing plate is loose, that can cause knocking noises. In addition, loose sway bar linkages, ball joints, tie...

Q: Car starting roughly

If you are hearing a grinding noise for a few seconds on engine start up, the timing chain tensioners are to blame. There are two chain tensioners, however, if one is bad, both are replaced. It is a rather large...

Q: Car can't start, car doesn't recognize the key. 2013 Nissan Leaf

Hello there. This is a common issue with the 2013 Nissan Leaf. A few possible causes for this fault are the key fob failure, security module fault, a wiring fault, or a failing key fob battery. If you are having...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.