Q: Q: Traction Control System

asked by on

The check engine light is on the traction control light is on saying it is shut off and the cruise control will not turn on

My car has 57500 miles.
My car has an automatic transmission.

The traction control system monitors the steering stability of the vehicle and engages when loss of traction has been detected. This is done by the use of electronic sensors at each of the four wheels that communicate with the Powertrain Control Module (PCM) regarding steering performance and stability in adverse weather conditions. The traction control system works by reducing engine speed and determining which wheel to apply brake pressure to in order to prevent the vehicle from sliding. The anti-lock braking system and the traction control system work together to maintain the stability of the vehicle. The computer uses this information received from electronic sensors regarding the rotational speed of each wheel, the horizontal motion of the vehicle, and the vertical motion of the vehicle to determine how to direct the traction control system or the anti-lock braking system to best control the vehicle when needed. When this warning indicator light comes on in the dashboard, this could be an indication of several issues such as faulty wheel speed sensors, a faulty steering angle sensor, a faulty rotational speed sensor or a problem with the steering rack. In some cases, the traction control system may simply need to be reprogrammed. I would recommend having a professional from YourMechanic come to your location to properly diagnose your traction control system.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Traction Control System

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: Ball joint

If your vehicle is a model year 2008 and you find that the ball joint for this year is not correct and you tried to use the 2009 model year part and it still does not fit. I would take...

Q: Brakes feel squishy

You are correct that excessive pedal travel can be caused by air entering the brake system. However, unless there is a leak or the system has recently been serviced, air should not have entered the system. There could be a...

Q: Rough idle at stops lights and when parked

This may be a sign of a faulty MAP sensor. The Manifold Absolute Pressure (MAP) sensor senses engine load and generates a signal that is proportional to the amount of vacuum in the intake manifold. The engine computer then uses...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.