Q: Keyless remote broken

asked by on

The keyless remote does not work on the driver's side front door.

The system will need to be checked to see if the drivers door lock is having an issue or the remote is the cause. The remote may have a bad button for the drivers door since it is the one used the most. Try a second remote to see if it works normal now. If it is okay after this then the remote is at fault and needs to be replaced.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Keyless remote broken

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: My passenger side door won't open the handle inside is perfectly fine but the lock is stuck in the middle.

Hi there. The door lock cylinder or actuator is stuck and not working. I recommend unlocking the door and using a small pry bar to activate the actuator lock. Then the door will open. Remove the door panel and the...

Q: Power steering pump whining and leaking

Hello. If the system is losing fluid then there must be a leak somewhere. Most of the time the leak is at the rack and pinion so it tends to leak further back on the vehicle. If the pump only...

Q: P0123 code 1999 Jeep Wrangler

Hi there - this may seem like a wild shot, but I wonder if your torque converter lock-up clutch is failing to release as you coast down, and the engine is having to fight it? I would think you would...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.