Q: Injectors not spraying

asked by on

I am getting spark from the plugs, gas is going to the injectors but not starting

My car has 1115625 miles.

If you are getting spark but no injector signal for them to open then you may need to have the camshaft sensor checked to see if it is giving a cam signal to the computer to operate the injectors. Scan the computer and check for codes to see if the computer sees any faults and pinpoint test the codes. You may have a defective computer.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Injectors not spraying

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Jeep making a whirring noise

Hello, I will address the issues as you present them. For the whirring/humming, I recommend having this noise heard by a mechanic to have it diagnosed correctly. Noises are a hands on job, so they must be experienced firsthand to...

Q: I have a leak of water coming from my motor do I need a head gasket my car keeps running hot

Hello. Though there are a lot of areas that can leak coolant on this car, it is common for the head gasket to fail and cause this. If the leak cannot be easily seen I usually pressure test the system...

Q: Car overheating - 1999 Nissan Sentra

This may be a sign of a faulty coolant fan relay. This relay receives input from the coolant temperature sensor which reads the temperature of the coolant in your radiator. As it reaches a certain temperature, the cooling fan relay...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...