Q: Q: How do I change the temperature unit?

asked by on

How do I change the temperature unit?

The temperature of the climate control system can be set to either Fahrenheit or Celsius. To do so, press and hold the Mode button. While holding this button, press and hold the Dual button for at least three seconds, at which point you will see the display change.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I change the temperature unit?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: A/c blowing hot air, broken belt

A missing AC belt can certainly be the reason the AC is not working. The compressor needs to be spinning for the system to provide cold air. With no belt to connect the compressor to the engine, no cold air....

Q: Bad mileage on 2012 mazda 2

In order to check the fuel mileage you should drive as if you are trying to save every drop of fuel. The mileage rating is based on not running the a/c and driving mostly highway miles to get the mileage...

Q: Bad steering problem, wheel locks up

Your car is equipped with electric power steering. The vehicle needs to be checked for codes in the steering system. If there are none present, please contact Hyundai to see if your vehicle is covered under recall #15V100000 for Hyundai...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.