Q: How do I use the wiper mist feature?

asked by on

How do I use the wiper mist feature?

The windshield wiper mist feature wipes the windshield once. You can use this feature when you have mist or condensation on the windshield, but there is not consistent rain. To use the mist feature, pull up on the wiper level to the MIST position, and immediately release. If you hold the wiper in the MIST position, then the wipers will continue to operate at high speed.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use the wiper mist feature?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: Windshield wipers not working.

The windshield wiper arms on these vehicle are prone to strip out and stop moving. The fix is to remove the wiper arm and inspect the splines on the are and the wiper shaft. Replace all the defective pieces. Most...

Q: Q: A/C blowing warm air

A failed compressor is just one of the many potential causes for your A/C being inoperative. It could be something as simple as low refrigerant level. If you are questioning your mechanic, I suggest you get a second opinion....

Q: Q: How do I adjust the instrument panel brightness?

The instrument panel controls are illuminated when the headlights are on, to help you see your controls even when it is dark out. The brightness of the instrument panel controls can be adjusted with the instrument panel illumination control. The...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.