Q: How do I use the trip odometers?

asked by on

How do I use the trip odometers?

The trip odometers display the distance that you have traveled since the last trip odometer reset. They can be reset at any time to start a new trip distance. To access the trip odometers, press the Trip button on the steering wheel until Trip A or Trip B is displayed on the trip computer. To reset either trip odometer, press and hold the Reset button on the steering wheel for more than one second, when one of the trip odometers is currently displayed.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I use the trip odometers?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: high mileage reading on my odometer for unknown reasons.

If the vehicle was register at 72K miles and then register at 99K miles after 11 months, that is 2,455 miles per month. If you are traveling on the freeways a lot and taking long trips that are 30 to...

Q: Changed bypass hose now engine overheats

Hello there, a few common faults will result in your 2003 Hyundai overheating after the bypass hose was replaced. The most common would be air trapped in the coolant system. This is common after repairs have been performed if the...

Q: How do I connect a USB device?

Your vehicle is equipped to connect with a USB device. To use a USB device, follow these steps: 1. Locate the USB port, which is directly in front of the shifter. 2. Plug the USB cable into your device. 3....

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.