Skip the auto shop - Our mechanics make house calls

Q: How do I use the sun visor?

asked by on

How do I use the sun visor?

The sun visor is a key safety feature that allows you to protect your eyesight from the sun. There is a sun visor in front of both the driver and the front passenger seat. To use the sun visor, pull it down so that it is facing you; this will help shade any sunlight that is coming in through the windshield. The sun visor also has a hinge on the side closest to the door, and latch on the side closest to the middle. To protect against sun coming through the windows, unhook this latch, and rotate the sun visor towards the window.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I open the hood?

The hood can be opened very easily by following these steps: 1. Pull the Hood Release lever, which is located on the lower left side of the dash. This will unlatch the hood partially. 2. Run your hands under the...

Q: How do I check the brake fluid?

It’s very easy to check your brake fluid levels. Simply open your hood, and locate the brake fluid reservoir. The reservoir will have a minimum line, and a maximum line, and the brake fluid level should fall between these two...

Q: How do I check the tire pressure?

You can check the tire pressure for each individual tire using your car’s electronic vehicle information center (EVIC). The EVIC display screen is located in the middle of the gauge cluster, and gives the driver lots of pertinent information. The...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.