Q: How do I use the steering wheel mode control button?

asked by on

How do I use the steering wheel mode control button?

The steering wheel mode control button is on the left side of the steering wheel, and says MODE. Press this button to turn on the sound system, or, if the sound system is on, to select the audio source.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use the steering wheel mode control button?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I clear MyKeys?

The MyKeys can be cleared very easily by following these steps: 1. Press the Up/down buttons on the steering wheel until Settings is displayed, then press the OK button. 2. Press the Up/Down buttons until MyKey is displayed, then press...

Q: Radio/navigation/telephone system freezes

When diagnosing cars technicians can only go off the symptoms they can duplicate. This can be complicated by intermittent issues such as this. Intermittent issues can be caught using various electrical testing procedures but the fault has to happen when...

Q: My 2007 Toyota Yaris jerks a bit when I press the accelerator- usually when it is cold.

Hello. Most of the time a jerking is caused by an engine misfire. If the engine has not been tuned up in some time it may be as simple as that. It can also be caused by a sensor that...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...