Q: How do I use the navigation system?

asked by on

How do I use the navigation system?

If your vehicle is equipped with a navigation system, it will help you find directions where you need to go. Your navigation will appear on the center display. To use the navigation system.

  1. Type in the address you need to go to.

  2. Follow the on screen commands to set your route.

  3. Follow the navigation directions it tells you to arrive at your destination.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use the navigation system?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I manually adjust the front seats in a 2012 Chevrolet Cruze?

If your vehicle is equipped with manually adjustable seats, then you can adjust your seat in either two or three directions, depending on your model. To pull the seat forward or push it back, pull the handle that...

Q: Strong vibration in the rear end

The noise and vibration sound like the u-joints are bad from what you've described, as they will cause all these issues if so. Inspect the u-joints and you will be able to see rust around the cups or see the...

Q: Car loses power, Check Engine Light is on, codes for EVAP system leak

If you have an air leak in the EVAP system then the MAP sensor will not be able to determine the air density, and the MAF sensor will not be able to determine the volume of air entering the engine...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.