Skip the auto shop - Our mechanics make house calls

Q: How do I use the child-protector lock?

asked by on

How do I use the child-protector lock?

A: The child-protector lock is a key safety fe...

The child-protector lock is a key safety feature that helps keep children secure in the backseat. When the child-protector lock is engaged, the rear doors cannot be opened from the inside, even if the standard lock is unlocked. This makes it impossible for children to open the vehicle from the inside. Setting the child-protector locks takes only a few steps: 1. Open the rear doors. The lock has to be set on both doors. 2. Locate the locks, which are located on the side of the open doors, next to the door latches. 3. Switch the locks to the lock position by pushing them down. 4. Close the doors. 5. Attempt to open the doors from the inside, to ensure that the child-protector locks are working properly. Tip When the child-protector locks are engaged, the rear doors can still be opened from the outside, as long as the traditional locks are unlocked.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What does the open door Warning Light mean?

The open door Warning Light is located on the instrument panel, and is accompanied by a buzzer. This light will illuminate when one or more of the doors are not completely closed. Check all of the doors and the trunk,...

Q: What does the Theft Attempted message mean?

When armed, the theft deterrent system is designed to prevent vehicle content theft. It does this by activating the horns and exterior lamps when a break in is detected. This is a content theft prevention system only, and does not...

Q: The car started stalling after the sparkplugs were repleced

A thorough inspection of the following engine components should be performed: all vacuum lines and electrical connections intake air tube to the throttle body check for any loose, leaking connections If the problem cannot be diagnosed,...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the P0052 code means This code is seen when the Engine Control Module (ECM) tries to control the...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...