Skip the auto shop - Our mechanics make house calls

Q: How do I use the auto up/down windows?

asked by on

How do I use the auto up/down windows?

A: If your vehicle is equipped with the auto u...

If your vehicle is equipped with the auto up/down windows, then you can roll the window all the way down or all the way up with only a quick press of a button. Press the Power Window switch down to the second detent, and immediately release, to roll the window down all the way. Pull the Power Window switch up to the second detent, and immediately release, to roll the window all the way up. Press or pull the switch at any point to stop the progress of the window. Tip Only the front windows are equipped with the auto up/down feature.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I use the front interior light switches?

The front interior lights have two settings, and are controlled by the front interior light switch on the ceiling, next to the lights. When the light switch is set to Off, the lights will never come on. When the switch...

Q: Need to replace the driver's side mirror

On many vehicles, the door panel does not need to be removed to replace the side mirror. The mirror usually has a small trim piece to cover up the mounting nuts on the interior side of the door. If you...

Q: How do I remove the Intelligent Access (IA) mechanical key?

The Intelligent Access (IA) key has a mechanical key inside it, should you ever need it. This key can be used to unlock the driver’s door. To access this key, slide the Release switch on the back of the IA...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.