Q: How do I turn on the hill descent feature?

asked by on

How do I turn on the hill descent feature?

The hill descent feature helps control your transmission and brakes when you are going down a hill. To use the feature, press the Hill Descent button, which is on the terrain management control. You can increase the dill descent speed by accelerating to the desired speed, or decrease the speed by braking to the desired speed.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I turn on the hill descent feature?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Brake lines have air, bled many times

Hello. Moisture in the brake fluid is being boiled off as steam when your brake system temperature gets above 212 degrees (at sea level). The steam re-condenses as water in the system BUT air pockets can be created and remain...

Q: 2006 Ford Explorer w/over 200k miles on it. Worth fixing??

If you have oil all over the engine bay, it's possible that there's just a valve cover gasket leak which is a fairly common repair done on many vehicles as they get older. As far as the tires it's possible...

Q: What does it mean if the Anti-theft Light is on in the dash?

Your car has a built-in anti-theft system. If someone attempts to start the car without a programmed key, open a locked door without a key, or even get in through the rear liftgate or open the hood, the horn will...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...