Skip the auto shop - Our mechanics make house calls

Q: How do I tilt the moon roof?

asked by on

How do I tilt the moon roof?

The moon roof tilt is controlled by the moon roof switches, which are directly in front of the moon roof, on the ceiling. To tilt the moon roof open, press the TILT button once. To close the tilt, press the DOWN button once.

Tip

The tilt can be stopped at any point during its movement by pressing either the TILT or the DOWN button.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I use the power windows?

The power windows allow you to roll the windows down, or roll the windows up, with the touch of a button. Each door has a Power Window switch, that controls that window. To roll down a window, press and hold...

Q: I have a code reader and it show P0446 mod$10 1 of 1 evap emission control system

Hi. Diagnostic Trouble Codes do not identify the parts that are faulty. Codes merely set as a consequence of the Engine Computer receiving out of range data. If a wire is corroded in a multiplexed "system" with ten sensors the...

Q: How do I control the tilt of the sun roof?

Your power sun roof has a tilt switch, which is located on the overhead console, across from the open and close switch. The tilt switch is on the passenger side of the overhead console. To open the tilt of the...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...