Q: How do I sound the alarm with the wireless remote control?

asked by on

How do I sound the alarm with the wireless remote control?

You can use the wireless remote control system to sound your vehicle’s panic alarm. To sound the alarm, simply press and hold the alarm button on the wireless remote when you are within range of the vehicle. The alarm will sound within a few seconds.

Tip

You can turn off the alarm at any point by pressing any button on the wireless remote control.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I sound the alarm with the wireless remote control?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Toyota Corolla 06 will turn over but won't start

Hi There, This may be related to many different possibilities, some of which may be related to a lack of spark or possibly timing issues and some of which may be related to a fuel delivery problem or a combination...

Q: How do I properly secure a LATCH compatible car seat into my seats?

If you are using a LATCH (Lower Anchors and Tethers for Children) compatible car seat, you are already off to a good start as the LATCH system uses a standard set of attachments and tethers to consistently install car seats...

Q: How do I program a remote keyless entry (RKE) transmitter when I have a recognized transmitter?

Programming a new remote keyless entry (RKE) transmitter is easy when you already have a recognized transmitter. Just follow these steps carefully: Gather all of the transmitters – the new ones, and the already programmed one – so that...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...