Q: How do I secure the floor mats in place?

asked by on

How do I secure the floor mats in place?

Certain floor mats are designed to be used on specific models. They should be secured in place so they don’t move around.

  1. Attach the floor mat by putting the retaining hooks into the eyelets on the floor mats.

  2. To secure the mats in place, turn the upper knob of the clips and align the triangle marks.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1,000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!
  1. Home
  2. Questions
  3. How do I secure the floor mats in place?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: My car won’t shift to the park gear. All other gears work

There are a number of different things that may cause the vehicle to not go into park such as a broken or damaged shift cable or mechanism, a faulty key tumbler in some cases, or a faulty transmission solenoid. I...

Q: I was driving and when I tried to make a turn my steering wheel was hard to turn. Soon after my car cut off.

Hello. It is very possible that the timing belt broke or the engine seized. I would usually check the oil level first. If it is empty then there is a serious issue. If there is oil then I would try...

Q: Replace water pump

Hello. If your vehicle is leaking antifreeze, especially at the water pump, then I would stop driving the vehicle and get it repaired as soon as possible. An engine leaking at the water pump is likely to overheat quickly, which...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.