Q: How do I quickly defrost the windshield and front windows?

asked by on

How do I quickly defrost the windshield and front windows?

If you are in a hurry and you have poor visibility due to frosted windows, you can quickly defrost the windows and windshield. Here’s how: 1. Use the fan control dial to set the fan to the maximum speed. 2. Press the front defrost button. 3. Press the recirculation button. 4. Use the temperature control dial to set the temperature to maximum heat.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I quickly defrost the windshield and front windows?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: My car is only 3 years old. Should I be suspicious that the starter went out?

Hi, thanks for writing in. A starter like any other mechanical and electrical part is subject to failing sometimes for no apparent reason. However, sometimes this is misdiagnosed as well and often times mistaken for something much more simple like...

Q: My car is moving the Ac get cold if I stop the signal or park the Ac get hot

This is a classic symptom is very common. Most likely the cooling fan for the condenser is not turning on allowing the high side of the A/C system to get to hot. This reduces the cooling capacity of your system....

Q: How do I close the trunk?

Closing the trunk is very easy. Here’s how to do it easily and safely: 1. Locate the trunk inner handle, which is on the inside of the trunk, near the latch. 2. Pull the trunk down with the handle until...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.