Skip the auto shop - Our mechanics make house calls

Q: How do I pair a phone with the infotainment system?

asked by on

How do I pair a phone with the infotainment system?

The infotainment system can pair up to five different mobile devices through the Bluetooth system. Pairing your phone takes a few steps, but is very easy: 1. Turn on the infotainment system. 2. Press the CONFIG button. 3. Use the MENU/SEL knob to select Phone Settings or Bluetooth Settings. 4. Use the MENU/SEL knob to select Bluetooth. 5. Use the MENU/SEL knob to select Pair Device. A four-digit personal identification number (PIN) will then be displayed, which you will need soon. 6. Follow your cell phone manual’s instructions for how to begin pairing a phone 7. When your phone is ready to be paired, locate Your Vehicle in the list of available devices. 8. After being prompted, input the four-digit PIN that was provided in step 5. 9. After being prompted, provide the system with a name for the device that you have just paired. 10. Repeat steps 2 through 9 to pair any remaining devices.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I pair a phone with the infotainment system?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I accept a phone call through the infotainment system?

When a paired device receives a phone call, a ring tone will be heard through the vehicle’s sound system. If the infotainment system is currently in use, the audio will be paused, and the ring tone will be heard. To...

Q: I replaced my battery yesterday in my 08 Equinox. this morning when i started it, it read my battery charging system is failed, r

Based on your description, I am almost positive that your alternator has failed. The alternators job is to charge the battery while the engine is running so that it has enough charge to restart the vehicle later. The message battery...

Q: I changed knock sensors on 2002 avalanche which also has after market Whipple charger .now it idles at 2000 rpm could it be the IA

Hey there: Anytime you install an aftermarket power adder (like the Whipple), it's common for tuning issues to occur. If your increased RPM happened right after replacing knock sensors, it's very possible that a vacuum line may have been removed...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...