Skip the auto shop - Our mechanics make house calls

Q: How do I open the hood?

asked by on

How do I open the hood?

Opening the hood is very easy: 1. Pull the hood release handle, which is to the left of the steering column. This will release the hood latch. 2. Run your hands under the hood, near the center of the vehicle, and move the secondary release lever to the right. 3. Lift the hood, and hold it in place with the hood stick.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Where are the power outlets located?

For added convenience, and considering the needs of a customer looking to fully utilize a truck like the vehicle, there are power outlets located inside of the truck. Below the AC/heater controls there are two outlets that are capable of...

Q: How do I accelerate when using cruise control?

If you are using the cruise control system, but need to accelerate, you can do so without canceling the cruise control. The cruise control will be canceled if you use the brake pedal, but not if you use the gas...

Q: How do I replace the license plate bulbs?

Your license plate must be clearly visible at all times. License plate bulbs turn on when your parking lights or headlights are on, and illuminate the license plate. If one of the bulbs blows, you’ll need to replace it. Here’s...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.