Q: How do I lock the windows?

asked by on

How do I lock the windows?

The Lock feature keeps the rear windows from being able to roll up or down. There is a switch on the driver’s door that controls the window locks. To lock the Windows.

  1. Press the right side of the Window Lock control.

  2. Press the left side of the Window Lock control to unlock the windows.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I lock the windows?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How much it cost to replace passenger and rear door for volvo 2003 s80?

Billing question sent to CS for the cost to replace the passenger and rear doors to a 2003 Volvo S80.

Q: What does the Cal message mean?

The Cal message can appear on your driver information center (DIC). When the DIC displays this alert, it means that the DIC compass needs to be calibrated. If this alert is accompanied by three dashes, then your compass is not...

Q: Today my oil pressure gauge jumped to high. It still runs fine, no awkward sound or anything, but as soon as I turn the key to accelerate, it shoots back to normal range

Hi, thanks for writing in. With the key on engine off, your gauge should read low pressure. The oil sender near oil filter should be disconnected to see if the gauge now reads zero pressure. Now ground the wire you...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.