Q: How do I customize the Reverse Tilt Mirror?

asked by on

How do I customize the Reverse Tilt Mirror?

The Reverse Tilt Mirror feature lowers the angle of the side mirrors when you are backing up, so that you have better visibility. When the feature is turned on, the mirrors will tilt down when the transmission is shifted to R (Reverse), and tilted back to normal when the transmission shifted out of R. Setting the Reverse Tilt Mirror feature takes only a few steps: 1. Turn on the infotainment system. 2. Press the CONFIG button to select the Configuration Settings menu. 3. Rotate the MENU/SELECT knob to Vehicle Settings, then press the knob to select. 4. Rotate the MENU/SELECT knob to Comfort and Convenience, then press the knob to select. 5. Rotate the MENU/SELECT knob to Reverse Tilt Mirror, then press the knob to select. 6. Use the MENU/SELECT knob to choose between On and Off.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I customize the Reverse Tilt Mirror?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Transmission fluid is leaking. Cracked on the bottom of the transmission.

Hi there. Depending on where the crack is located on the bottom of the transmission will depend on whether or not you will be able to fix without replacing the transmission. For example, if the crack is in the fluid...

Q: My 2009 Equinox is overheating intermittently. It overheated in the summer and tnen not again for 3 months then twice in one week

Check the coolant level to be sure it is adequate. Of course, if the coolant level is low enough to cause overheating, you may have a coolant leak. If the overheating is intermittent that would point to a possibly sticking...

Q: Check engine light readsP0102, twice I've changed the mass air sensor. Check engine light is on. Repaired ecm as well

The problem may be with the mass air flow sensor (MAF sensor) connector. Start the engine and wiggle the connector. If the engine RPM starts to change or the engine performance changes, you'll know the connector is to blame. ...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...