Q: How do I clean and protect the inside?

asked by on

How do I clean and protect the inside?

You want to keep the interior of the car just as clean and nice-looking as the outside.

  1. Use a vacuum cleaner to remove dust and dirt.

  2. Use a damp clean cloth to wipe down dirty surfaces.

  3. Clean leather areas with a vacuum cleaner and a damp cloth with diluted detergent.

  4. Wipe leather surfaces with a soft dry cloth to remove all moisture.

Tip

You can clean synthetic leather in the same way. It’s a good idea to clean the cabin at least two times a year.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I clean and protect the inside?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: There is a humming coming from the front tire. I checked the tire for a possible wheel bearing issue but the vertical shake of tire was solid.

A tight feeling when shaking the tire vertically does not always completely rule out the wheel bearing. A technician with a stethoscope or electronic hearing device can listen to the wheel as it is rolling and compare the type of...

Q: My timing belt broke what should I do? Can I drive my car?

Hello, thank you for writing in. The timing belt is responsible for keeping the camshaft and the crankshaft in sync so the valves will open and close accordingly. With that said, the vehicle is likely not going to run at...

Q: Interior lights are not working

The most likely cause of this issue would be a short to ground somewhere in the interior lighting system. If a wire has too much metal exposed and it is coming in contact with the vehicle's chassis, excess amperage is...

Related articles

What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.