Q: How do I change the audio controls?

When your engine is idling, the vehicle is likely stopped which lowers the airflow through the radiator. The more airflow the radiator receives the more likely the engine is to remain cool. When the air conditioning is turned on the...

They may cause some sag in the rear suspension but if you word the inside of tires, then you have worn bushings on the lower control arms and possible weak springs and struts. Have the entire suspension inspected and have...

Hello, thanks for writing in about your Dodge Challenger. From what you've described it sounds like you may have a different sensor than what the auto parts store has listed. If you go to the dealer you would be able...

You may have to have the whole steering column replaced (https://www.yourmechanic.com/services/steering-column-replacement) including the steering wheel. The reason you will need to do this is your steering may be off quite a bit and it is probably not safe for you...

If the broken off piece is admitting unmetered air to the intake, then yes that will have the effect of stalling the engine. A big initial concern is be sure no debris gets in there because anything in the intake...

This may be related to a dirty or failing mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement). The mass air flow sensor monitors the air intake as it enters the motor and relays this information to the ECU which then makes adjustments to...

Hi there. I watched the video and was unable to determine for sure what is causing this noise. However, it resembles a damaged tie rod or wheel bearing. It is true that if the component wears out too much, it...

Hi there. It depends on whether or not you are racing your friend on a NHRA sanctioned Drag Strip or illegally on the street as to whether or not the O2 sensor is causing you to be slow. If you're...

Depending on how hot the vehicle got and how long the engine ran without coolant, this may have caused some serious engine damage. Commonly, when this happens an engine may get too hot to the point where a cylinder head...