Skip the auto shop - Our mechanics make house calls

Q: How do I adjust the auto light sensitivity?

asked by on

How do I adjust the auto light sensitivity?

A: When your headlights are in automatic mode,...

When your headlights are in automatic mode, they will come on whenever the vehicle detects that it is dark outside. However, you can adjust the sensitivity of the light sensor by choosing one of five settings: Max (lights will come on when it is still pretty light out), High, Mid, Low, and Min (lights won’t come on until it is pretty dark out). To choose which setting you would like to use, follow these steps: 1. Turn the ignition to On, while making sure the vehicle is completely stopped. 2. Press the Menu button. 3. Use the +/- buttons to highlight Customize Settings, then press Source. 4. Use the +/- buttons to highlight Lighting Setup, then press Source. 5. Use the +/- buttons to highlight Auto Light Sensitivity, then press Source. 6. Use the +/- buttons to choose between Max, High, Mid, Low, and Min, then press Source.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: OBD code P0501, speedometer dead, hesitation shifting.

From your description it sounds like either the speed sensor is bad or there is a problem in the wiring of the speed sensor circuit. Your transmission is shifting weird because the car does not know how fast it is...

Q: How do I answer a call when using the voice recognition system?

When you receive a phone call through the Bluetooth system, the sound system will be muted, and a ring will be played through the speakers. To answer the call, simply press the phone/voice command button once.

Q: I have a new battery, and my car starts with a jumper cable, but it won't restart after driving and shutting the engine off.

This suggests you may have a bad grounding issue or potentially a faulty alternator. As you may know, the alternator is what charges your car's battery when the car is running. When this is not working properly, your battery will...

Related articles

How to Renew Your Car Registration in Oklahoma(DELETED)
Having your car registered with the Oklahoma Tax Commission is an important part of driving legally in this state. You will need to do this within 30 days of moving to Oklahoma...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.