Q: How can I paint a fendor on my Jeep grand Cherokee

asked by on

How can I paint a fendor on my Jeep grand Cherokee

My car has 20000 miles.
My car has an automatic transmission.

Hello. There are several ways that you can accomplish painting just one panel. It really depends on your level of experience and how you feel most comfortable performing the task. You can start by removing the entire panel if you choose. This would make for a lesser change of getting excess paint on the rest of the vehicle and having to blend it in. If you do not wish to do so, you can tape off (or other way of covering) the panel’s surrounding areas to not get paint on them. The next step is to choose the type of paint that you want for that piece. If you are trying to match the color of your vehicle, the best way is through the manufacture’s dealership or professional paint company. Then depending on the kind of paint you choose, there will be some prep work that needs to be done so the new paint will stick to the old. You may contact the service department with any further questions regarding help with this project.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How can I paint a fendor on my Jeep grand Cherokee

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I have a clinking noises from the rear when I am driving over a bump. The noise is most relevant in hot weather.

Hi there. The noise sounds like the control arm bushings are worn and making the suspension walk around. Jack up the vehicle and check the suspension on the rear for any looseness and if there is any broken or damaged...

Q: P0480 trouble code

Hello. Typically this is not an issue with the relay. There have been some issues with the programming within the control computer that causes the fan to not work right which will cause this code. Being that the vehicle is...

Q: turn on key got to wait 5 to 15 minutes for fuel pump to engage runs fine but after 1 minute after shut off got to wait agian

You most likely cannot run a hot wire to the orange and black wire. This may power the fuel pump but will not power the auto shutdown relay. You will need to see if the relay is getting power to...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...