Q: Hola quisiera saber donde se encuentra la valvula pcv de una hummer h3 modelo 2006

With the hands free feature on your car, you will be able to make phone calls while driving. This allows you to keep your hands on the wheel. To make a phone call using the hands-free feature. Press the Voice...

The VANOS unit or solenoid can cause a rattling sound from the engine. The VANOS is a camshaft timing system which runs off of engine oil pressure. If the oil is the wrong viscosity or the system has a buildup...

The flashing Check Engine Light tells me that the engine is having a misfire condition occurring. This could be due to bad spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement) or ignition coils (https://www.yourmechanic.com/services/ignition-coil-replacement) as well as other sensor on the engine reading incorrectly. There...

Code P0505 (https://www.yourmechanic.com/article/p0505-obd-ii-trouble-code-idle-control-system-malfunction-by-jay-safford) stands for Idle Air Control (IAC) Malfunction. Anything that affects the idle control system could be the cause. This could be anything from the IAC control circuit (PCM, wiring, etc.) to a mechanical problem such as a...

Hi there: If you're Check Engine Light is coming on and somebody diagnosed this as a problem with your O2 sensors or the catalytic converter emissions system, it's highly possible that the trouble part are the front or back bank...

Your vehicle can use full synthetic 0w30, 5w30, 0w40, 5w40 MB approved only is recommended. You will see on the bottles MB approved.

Hi there. When it comes to completing an engine swap, there are so many additional changes you'd have to make in order for this to work. For starters, you'd have to replace the transmission, driveaxles, fuel system, cooling system, ignition...

Hi Shae. Thanks for contacting us today. It's a good idea to let the charging system fully charge before attempting to jump start the vehicle. Some of these units require you to not have them plugged in, so you'll have...

Unfortunately the only way to resolve this issue would likely be to replace the tensioner as well. If tension cannot be relieved from the belt due to a broken bolt the tensioner will have to be removed completely. If the...