I just had a P2229 code come on on my 05 duramax any sugg...

I just had a P2229 code come on on my 05 duramax any suggestions Mechanic's Assistant: Just to clarify, what's the exact code? And have you tried to reset it? Barrometric pressure sensor circuit high voltage. No I haven’t...

I just had a P2229 code come on on my 05 duramax any suggestions Mechanic's Assistant: Just to clarify, what's the exact code? And have you tried to reset it? Barrometric pressure sensor circuit high voltage. No I haven’t tried to clear the code Mechanic's Assistant: What is the make/model of your '05 car? 05 GMCsierra 2500 6.6 Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? I have not tried anything yet I just put a scanner on it and this code came up Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? The truck started running rough and I had a serious loss of power. About 45 miles an hour top speed right now

Automotive Expert
Hello, my name is \*\*\*\*\* \*\*\*\*\* to just answer! I will be assisting you with all of your vehicle questions today. I’m really sorry that you’re having this issue and I’m going to help you through it, but please understand that I (respectfully) don't know your skill level or tools you have to assist us to diagnose/repair your vehicle. Also, understand that I can't see, smell, hear or touch the vehicle either, so your patience/understanding is appreciated. Please allow me up to 10 minutes to gather schematics and other pertinent information for this issue. I do not know anything about the fees or charge so please if you have any concerns, direct them to customer service. My aim is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. I appreciate your patience and will provide responses as soon as possible. Thank you.
Automotive Expert
the Barometric pressure sensor is faulting. I would recommend replacing it. (SEE ATTACHMENT)

I am pretty mechanically inclined but have never changed one of the sensors before and am not sure where it’s located or how easy it is to replace. I did clear the code, [engine](/topics-engine-gmc/) light went off and seems to be running fine but I don’t expect it to last.
Automotive Expert
I just sent you the procedure for replacement

Found it and am gonna go get a new one now. Thank you.
Automotive Expert
you are very welcome. please stay well.

You too
Automotive Expert


I was just running through things in my head and realized I didn't grab a ladder out of my trailer do you have one so I can get up on the road that I could borrow?
Automotive Expert

9 mins. Highway 18 sucks because I can't ask anybody and I'm used to going fast in the city LOL
Automotive Expert
this is just answer

Sorry about that yeah I love the text with the?'s was from a buddy of mine who was wondering how far out I was from meeting up with him. Oh yeah O'Reillys didn't have the sensor in stock so they ordered one for me so once I get it I'll drop it in and let you know how it goesThanks again for the help
Automotive Expert
ok, very good. take care

Still not sure what you need?

Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.

What others are asking

Belt making noise.
The noise in this engine belt (https://www.yourmechanic.com/services/serpentine-drive-belt-replacement) is most likely the belt tensioner is weak and will make a knocking noise mostly at low engine speeds is is noticed. I would recommend having it checked and replace the tensioner and...
Car leaks antifreeze from hose
Coolant leaks can be tricky. I recommend having a certified technician, such as one from YourMechanic, come out to your car's location to run a diagnostic inspection of your antifreeze leak (https://www.yourmechanic.com/services/oil-fluid-leak-inspection), and suggest the best path to repair.
it screams when I push the gas petal to accelerate the rpm rev high causing it to act like its losing power going up hill
This sounds like the transmission is slipping. I recommend having a transmission mechanic diagnose the slipping by checking transmission pressures, checking for trouble codes (https://www.yourmechanic.com/article/what-is-the-on-board-diagnostics-obd-system), or checking for any solenoids that are not letting it shift.
Remove camera message - 2013 Cadillac XTS
No, a continuous warning means the system must require some sort of service. The camera is very delicate and may have been bumped or moved in the process of the windshield replacement. Visit the local dealer to have the system...
Heater is not working
The lack of heat being generated by your system may indicate a clogged heater core. The [heater core]((https://www.yourmechanic.com/services/heater-is-not-working-inspection) is a small radiator like unit that circulates the hot coolant from the engine through the heater core which then uses this...
How long does it take to put an alternator in?
The replacement of the alternator on your type of vehicle will usually cost about 1 and a half hours of labor. The actual time it takes for the technician performing the service depends on his or her skill level and...
how much is it for a tune up Nissan maxima 2006
Hi there. With newer vehicles, the typical 'tune-up' has changed quite a bit due to the evolving maintenance services needing to be completed. In general, today's tune-ups are based on the vehicle mileage. To learn what services are recommended for...
I have A 91 honda accord with shaking and acceleration issues
This problem of loss of power can be caused by more than one of several causes and would need additional diagnosis to isolate cause. The most common causes are low fuel pressure, distributor failure, and misfiring ignition system. I recommend...
The car won't turn on
You have not specified whether the starter motor works or not versus a circumstance where the engine does crank but won't catch and run. I will cover both scenarios for you. Check to see if there are any stored diagnostic...