Q: Exhaust manifold

asked by on October 11, 2017

Can someone tell me how many bolts should be on exhaust manifold that hooks to engine on 98 dodge dakota 3.9 6 cylinder? When I look online at manifolds it shows they have 4 bolt holes but only come with 2 bolts

These manifolds have 4 bolt holes and may have two bolts and two studs that have nuts with washers.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

ABS light coming on

It is very possible that you may have a wheel speed sensor that is going bad. That is the most common problem to turn the ABS light on. There could also be some damaged wiring but it also may be...

2012 Dodge Journey sxt windows don’t roll down from any door panel master panel on drivers door still locks and controls mirrors

The windows are controlled by the window control modules and you will need to have the modules scanned to get the failure codes to see if a module failed or there is an electrical issue. I recommend having a mechanic...

Will a 2016 3.5 bolt to a 2010 2.7 charger

Hi Damon. You would likely want to contact a Dodge engine specialist to better answer this question, as we don't offer recommendations for non-OEM applications.

The engine will not warm up to normal operating temperature. I've replaced the thermostat twice, replaced the waterpump and bled

The cooling system will not get up to operating temperature if the thermostat is not seated correctly, radiator cap not holding enough pressure or the cooling fans are on all the time wen the key is on. If you already...

Front brakes drag

In order to locate the possible cause of your front brakes dragging, you will need to do some tests to isolate the cause. When you are testing the system brakes dragging the lift and support, check both front wheels to...

Evaporative Emission Control System Purge Control Valve Circuit Malfunction how to fix and where is it ?

Hi there. The best advice I can offer is for you to complete one of two things. First, it would probably be best to have a professional mobile mechanic come to your location and complete a check engine light inspection...

Engine stalls under braking

What you are describing sounds like possibly a faulty MAP sensor as the vehicle responds adversely to a load put on the motor (i.e. putting it in gear, turning on AC or engaging the brakes). The Manifold Absolute Pressure (MAP)...

On my 1998 Honda Accord both of my blinkers stopped working

If both blinkers stopped functioning, then it is probably not a bulb, but something common to both sides like a flasher relay. It's not an expensive part, and just plugs into the fuse panel. If you still have your owner's...

What is wrong with my gas tank

Hello, thank you for writing in. Typically the fuel nozzle on the gas station's pump has a small hole in it. Once the fuel has filled up the tank and the filler neck, it reaches this small hole in the...

Related articles

4 Essential Things to Know About Your Car’s Muffler
The The muffler on a vehicle is designed to reduce the amount of noise coming from the exhaust system of your automobile. The muffler quiets the sound pressure that the engine creates by using acoustic quieting, which means the muffler...
2012 Jeep Grand Cherokee vs. 2012 Dodge Durango: Which One Should I Buy?
Medium to large SUVs are a fun class of vehicles: plenty large enough for moving people around, but if you really want to get out there in the mud and have some fun, they are still good for that type...
Industry News for Automotive Techs: November 5 - November 11
Tesla buys Grohmann Engineering, Ferrari's future hybrids, next-gen Dodge Charger and Challenger, Nissan e-Power system, and YourMechanic recognition.