Q: Engine misfiring and giving a code P0302.

asked by on

Engine misfiring. Recently had spark plugs replaced. I get a code P0302.

It sounds like you could have a bad coil pack. Have a technician replace the spark plug wires and test the coil packs.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Engine misfiring and giving a code P0302.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car jerks forward slightly everytime I hit 19 mph

Hello, and thank you for writing in. The misfire needs to be the focus of our attention. If you had moisture on the spark plugs and white smoke, then there is some kind of coolant leak. This fouling on the...

Q: Car begins to shake at or about 50 mph. It's almost like a motor mount maybe broken. Could that be the issue?

Hello there, many faults will cause a vibration above 50MPH in your 2009 Chevrolet Malibu. It is great you have noticed the vibration is not in the steering wheel, as this rules out potential issues. The vibration is not likely...

Q: esp bas light on dash keeps coming on

There is a TSB (technical service bulletin) for this issue. It does say the brake switch is the source of the problem. At least it can be the source of the fix. But it doesn't say replace the switch. Apparently...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...