I have a [engine](/topics-engine-chevy/) power is reduced


I have a [engine](/topics-engine-chevy/) power is reduced Mechanic's Assistant: How many miles are on the car? Is it an automatic or a manual transmission? 186458 Mechanic's Assistant: What is the make/model/year ...

I have a [engine](/topics-engine-chevy/) power is reduced Mechanic's Assistant: How many miles are on the car? Is it an automatic or a manual transmission? 186458 Mechanic's Assistant: What is the make/model/year of your car? 2010 chevy traverse lt Mechanic's Assistant: Are you fixing your Traverse yourself? What have you tried so far? Change the mass air flow the throttle body [spark plugs](/topics-spark-plug-chevy/)

Automotive Expert
Hi, I'm Chad. Welcome to JustAnswer. I'm reviewing your question and I will be posting your reply ASAP. Thank you for your reply and that information as this does help me better understand the situation. I’m sorry to hear you are having this problem. I know this can be frustrating. Please give me one moment to type out some info for you. I’ll be right back! A live optional phone call will be automatically offered by JustAnswer, you can accept or if you decide to decline we can continue with text until you feel the live call would be better suited to you. I will try to help you on this here you must have a check engine light on , what are the fault codes retrieved? after replacing these parts,did you rescan it ? **Please Let Me Know** **Thank You** **Chad Farhat** **ASE Certified Technician**

The same codes keep coming upTextHello
Automotive Expert
What are the codes

P009 p0017 p0014 p0016 p0008Ok
Automotive Expert
These codes point toward a failing timing chain, this is around a $2000 job at a shop depending where you go. Sorry about the bad news, let me know if you have questions. Thanks.

What others are asking

What does the High Beam indicator light mean?
When you turn on the headlights, you should be able to see the road ahead of you. However, once you get out of urban or suburban areas, the roads can be very dark and you need a bit more to...
Car squeaking.
Without hearing the noise it will be difficult to give you an accurate recommendation. Rubber bushings and moving suspension components can cause these type of noises. Also rubber seals where body panels come together such as doors to body can...
Battery Drain on 2012 Honda Civic
Using a trickle charger can be good for cars that are only driven occasionally, but in this case it would just be masking a larger problem. You likely have a parasitic draw on the electrical system, though you should have...
Main relay, EMS1 fuses, and EMS2 fuses are missing. Do I need these parts?
Hi there. The codes are coming up for the camshaft position sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement), Oxygen sensor (https://www.yourmechanic.com/services/oxygen-sensor-replacement), EGR valve (https://www.yourmechanic.com/services/exhaust-gas-recirculation-egr-valve-replacement), and evaporative (https://www.yourmechanic.com/services/canister-purge-solenoid-replacement) system not working. The fuses for EMS1 and EMS2 and the main relay vary depending on what Aveo...
Brakes fade and pedal go to the floor
The brake pedal should stay up hard when you have the engine off. As long as you do not see any loss of fluid after system is bled out of any air in the system. You may need to have...
Why does my ABS lights in dash come on after driving for a while on my 2011 Hyundai Sonata
Hello. If this issue has occurred ever since the work was done then I would suspect that there is something that was not installed correctly. If you are getting noise also then the ABS wheel speed sensor may be contacting...
Does my 2007 Audi A4 Cabriolet have or support CANBUS for steering wheel control of an after market navigation system?
Unfortunately, YourMechanic does not diagnose problems with, repair, or install aftermarket sound systems. I would recommend reaching out to the products manufacturer to determine if it is compatible with your vehicle.
White smoke/noise from new power steering pump and difficulty turning wheel
Hi Smith. Thanks for contacting us today. If the pulley is hard to turn and there is smoke coming from it, then it's more than likely that it's either not the right pulley for that pump, not properly aligned or...
When I am accelerating, my car makes a squealing noise
You should have the serpentine belt checked to see if belt is in need to be replaced or tensioner is causing slipping of belt. If it is replace tensioner and belt.