I have a 2016 LTZ Impala in the code read po496 what is t...


I have a 2016 LTZ Impala in the code read po496 what is that Mechanic's Assistant: Just to clarify, what's the exact code? And have you tried to reset it? Code # po496 Mechanic's Assistant: Are you fixing your Imp...

I have a 2016 LTZ Impala in the code read po496 what is that Mechanic's Assistant: Just to clarify, what's the exact code? And have you tried to reset it? Code # po496 Mechanic's Assistant: Are you fixing your Impala yourself? What have you tried so far? Nothing

Automotive Expert
Hello, my name is \*\*\*\*\* \*\*\*\*\* to just answer! I will be assisting you with all of your vehicle questions today. Give me one moment while I review your question and I will be right back with your answer, or I may need some additional information from you about your vehicle. The site will ask for a phone call not me so please disregard that thanks!

Ok
Automotive Expert
Its for the purge valve solenoid very common and not a hard repair. This video will help. https://youtu.be/w4F3mDZNkEk If you need more help please use the reply tab to continue our conversation. If no further assistance is needed, please consider rating me as 5 STAR!! It is much appreciated. You can rate at any time and we can continue to work on your question as this will not close out your question. Stay Safe !!! Bonuses greatly appreciated

What others are asking

Not happy about transmission failure
Chevrolet determined that the transmission on the 2009 Chevy Traverse that are equipped with the 6T70/75 6-speed automatic transmission (RPO MH2, MH4, MH6, and MY9 have breaks on the clutch wave plates. This causes the transmission to have no reverse,...
Battery light flashing, car cannot be started
Hello there. In most cases similar to this, the alternator and battery will fix the issues you have described. In more rare cases, there may be other things that cause the same symptoms. They are the battery cables, alternator fuse,...
Bleeder valve not sealing
Try and remove the bleeder completely and cleaning the seat and bleeder and see if it works. If this does not work then replace the bleeder. It would've been helpful to know which bleeder screw you are referring to, as...
When driving, my engine sounds like it is missing
You definitely have a misfire (https://www.yourmechanic.com/article/how-can-problems-with-the-ignition-system-cause-misfiring_2). It sounds like the misfire gets worse under load, which is why the Check Engine Light starts blinking. This indicates the catalytic converter (https://www.yourmechanic.com/services/catalytic-converter-replacement) is being damaged. A misfire under load is usually caused...
I am trying to figure out what type of differential a car usally has?
Think about the differentials (https://www.yourmechanic.com/advice/tag/differentials) in a different way. The non-driven wheels already spin independently of each other, and therefore needing a differential is not necessary on those wheels. On driven wheels, the drivetrain must be able to power both...
The navigation on my 2006 Acura TL stopped working.
Hi there. From my experience with this car, if the navigation keeps turning off and on, it is due to a failure in the hardware in the navigation module. I always check the voltage going to the module first to...
1999 Pontiac Grand AM runs rough and smells weird
Hello. An engine running rough at idle could be a vacuum leak (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-vacuum-leak) creating the wrong fuel ratio for the engine to operate correctly. The smell is probably unburned fuel caused by the vacuum leak issue. The belt shredding could...
Need to locate the oil filter on a 2001 Oldsmobile Silhouette
Hi there. Although this video is for an Alero, the motor on your Silhouette is identical. You can watch the video (https://www.youtube.com/watch?v=9TG2wgLLtzo) to see where the filter is located and how to remove.
My car is loud when driving (sounds like I have no exhaust) and it takes about a min to get up to the speed limit then goes faster
Hi There, It sounds like you may have damaged your catalytic converter (https://www.yourmechanic.com/services/catalytic-converter-replacement) when your car was stuck in the snow. It may have possibly resulted in the converter housing itself being caved in causing it to not flow properly...