Q: Check Engine light on

asked by on January 20, 2016

My Check Engine light came on,as well as a wrench light.

Check Engine Light is on Inspection $79.99 - $99.99 Get a Quote

The wrench light is a maintenance indicator. It illuminates whenever your vehicle is due for a timed maintenance. The check engine light could be several hundred issues. A qualified technician such as one from YourMechanic can retrieve engine codes and identify any issues you may be having.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

How do I turn the high beams?

High beams on your truck can become useful when driving at night when there are no street lamps or other cars around. The high beams can increase your range of vision. To turn on the high beams. Make sure...

Wiring harness cost for 54 ford f100

If you can find a mechanic that is willing to build a wire harness from scratch for the vehicle it will have to be straight time and materials to do it. This means if it takes 10 hours to make...

No power when stopping and pulling out in road

Hello. There are many things that can cause a vehicle to suddenly stall out. You mention that there was an issue with the power windows and door locks, this may be an indicator that the issue is electrical in nature....

Car slips out of 3rd gear

Modern transmissions are fully synchronized, which means there is a system of synchronizer clutches that speed or slow down the rotation of the gears until both are rotating at the same speed and can be locked. The most likely causes...

blow by around pcv and around oil breather cap.

Hi there. Engine blow-by is the result of combustion gasses getting past the piston and/or piston compression rings, this builds crankcase pressure. The PCV (positive crankcase ventilation) valve system is designed to remove the pressure and recirculate the gasses back...

EGR valve and vacuum

If you got code P0401 for the EGR system malfunction, then the system would need to be tested to see whether or not the vacuum modulator valve is holding vacuum and can control the EGR valve. These tests are needed...

Truck running rough

Hello. If this only occurs when the engine is cold then you may have a sensor reading incorrectly or you may have a vacuum leak. Most of the time if the Check Engine Light is on I start by scanning...

Dashboard warning lights come on during acceleration

Hello. Thanks for writing in about your Infiniti EX35. It sounds like one of your sensors for the system is reading incorrectly. I usually check the tires first as an odd tire on the car will cause this. If the...

Car idles low. What's going on?

Hey there. The engine will need to be checked for vacuum leaks in the PCV system or if the Check Engine Light is on and the idle control valve stopped working. Have a mechanic scan the computer and test the...

Related articles

P2193 OBD-II Trouble Code: System Too Lean at Higher Load Bank 2
P2193 P2193 code definition System Too Lean at Higher Load Bank 2 What the P2193 code means P2193 is an OBD-II generic code for the Engine Control Module (ECM) detecting the fuel control has reached its rich limits when the...
P0499 OBD-II Trouble Code: Evaporative Emission System Vent Valve Control Circuit High
P0499 code means the ECM has detected abnormal amounts of pressure in the evaporative emissions system due to clogging or faulty/broken valves.
P0471 OBD-II Trouble Code: Exhaust Pressure Sensor Range/Performance
P0471 means the powertrain control module has detected an voltage that is out of the normal range due to the exhaust back pressure system.