Q: Car will not start in cold weather.

asked by on

Car does not start below 48 degrees. The car has a new battery.

It could be a number of things causing the problem. I would have a technician change the fuel filter and check fuel pressure and test to see if it’s getting spark at the spark plugs. I have seen these cars have a bad coolant temperature sensor that may cause it not to start as well.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Car will not start in cold weather.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: A little bit of white smoke comes from the motor when I get off the highway and come to a complete stop. It smells like burning oil.

Hi there. It sounds like you may have an oil leak(s). The smoke and smell you are experiencing is the oil being burned off by the engine and exhaust heat. The source of the leak may be slightly difficult to...

Q: Misfire still after tuneup

Hi there. If the spark plug, plug wire and ignition coil are good, then the issue may be inside of the engine. I would do a compression test first to see if there is any internal failure. If the compression...

Q: Can a Car Battery Freeze?

A new or nearly new car battery in most of today’s vehicles is fully charged if the voltage is at about 12.6 volts. When a battery starts to age the voltage that it can store will start to be less...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.