Skip the auto shop - Our mechanics make house calls

Q: Car misfires

asked by on

My car is misfiring, and the computer is broken.

A: One thing comes to mind with your car. Ther...

One thing comes to mind with your car. There is a bulletin to solve a problem with fuel injector primary circuit codes. P0351-P0356. This may or may not repair the misfire, but it will prevent the false codes. If this is your problem, all 6 coil packs need to be replaced. Then the PCM will need to be tested. Only a Ford scan tool can do this. If it fails, the PCM will need replaced and reprogramed. If this is not the case, and you would like to get your car’s misfiring problem diagnosed, I would recommend having a certified mechanic come to you to service your car.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Cylinder 4 misfire, fuel injector looks to be the problem, only misfires on start up or idle, is it safe to drive?

Driving for an extended period with a misfiring cylinder can certainly do damage. That cylinder will run hotter because of the misfire and piston and/or valve damage can occur. If you need help having this repaired, a certified professional from...

Q: Can a car's computer system determine if it jump started another car

Your car's computer does not have anyway of telling whether or not it has jumped another vehicle. As you may know, when jumping another car, this can cause a slight momentary drain on your car's battery as the other car...

Q: Engine quit after ticking, then louder ticking.

Hello there, you have several different faults going on with your 2005 Mercedes C240. The P0341 Code meaning is Camshaft Position Sensor Circuit Range/Performance and can be caused by a wiring harness fault, failed sensor, or engine timing improper. The...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the P0052 code means This code is seen when the Engine Control Module (ECM) tries to control the...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...