Q: Car jumping

asked by on

The car is jumping.

One thing comes to mind with the car jumping and that is a driveline vibration. A worn or sticking U-joint can force the driveshaft to be out of balance creates serious vibration. If needed, you should have your U-joint replaced so that you can have this issue addressed.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: vibration and shaking at idle. also very loud and noisy engine. replaced all motor mounts, spark plug components, and intake syste

Often noise is related to exhaust system leaks or internal failures in the exhaust such as loose baffles in the muffler. To rule out accessory drives and pulleys as a source of noise what you can do is momentarily run...

Q: crack in theromstat housing

Hi there. This is a common problem on this engine. If the housing is cracked then the entire intake manifold needs to be replaced as an assembly. There is no repair that will ensure that it will not leak any...

Q: When im accelerating i can feel the engine pulling back

There are a number of things that may cause the car to hesitate when accelerating such as low fuel pressure, a dirty or faulty mass air flow sensor, clogged or dirty fuel injectors, a faulty throttle position sensor or potentially...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.