Q: Broken glove compartment.

asked by on

The glove compartment is broke.

The problem you are having is not a common problem and the actual part that broke would need to be known. Is the latch broken or is one of the hinges broken? My recommendation is to have a technician check it out and see what is broken and why it broke.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Broken glove compartment.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Noisy power steering wheel, regular fluid used

Hello there. It really depends on what type of regular power steering fluid was put into the vehicle. BMW calls for the standard use of Dexron III fluid which is commonly seen. Most over-the-counter regular power steering fluid are basically...

Q: Car turned off completely during highway driving

In order for an engine to continue running, it must have three things. These things are compression, fuel, and ignition. If one of those three things goes away, the engine will no longer run. I would recommend checking your...

Q: Is there a constant 12-volt source from the fuse board under the glove compartment?

It does not appear that there is a fuse for the horn located in the interior fuse panel. I would probe the ignition and accessory power fuses to see if they are a constant 12-volt source. If one of them...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...