Q: After replacing my brake pads sway bar link and battery terminals my car won't urn on and shifter is loose
After replacing brake pads and sway bar link and battery terminals my car won't start but lights and radio turn on and my shifter is very loose
My car has 170000 miles.
My car has an automatic transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Radiator cap needs replacing.
If you have a white residue building up just below the cap and you have to add coolant frequently, this could be the issue. The cooling system and cap need to be pressure tested to ensure the system is not...
Ignition sticking.
The key lock solenoid in the grounded shifter will cause the key to stick in the ignition. Most common cause is that the car is not all the way in park. There is a round piece near the base of...
The steering wheel light is blinking on and off
The steering wheel light illuminating on your dashboard means there is an issue with the electrical power steering system. The issue may be with the main motor itself or with any of the components involved. This can include the wiring...
Car wont start or turn over battery is good
Hi there. In most cases, when you crank over the vehicle but it doesn't start, it's caused by one of three items. First, the sequence the technician recommended was to attempt to clear an error code that disables the ignition...
im working on a 2005 chrysler with a 2.7. i keep getting a p0016 timing misalignment. i have retimed it twice. changed the sensors
Try checking and updating the computer program with the latest calibration. There is a bulletin for P0340 and should cover P0016 also. If after reprogramming the PCM and then road test to see if code returns. There has been problems...
My car won't accelerate fast even if I have the gas pedal all the way down
This may be a result of low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or potentially a faulty transmission control module. A faulty transmission control module may cause a delay in acceleration or erratic shifting of gears. The transmission control module has various sensors...
Car quickly loses speed
You will need to have computer and transmission tested to see if codes are stored and see if transmission is shifting into high gear and then torque converter lockup is releasing on deceleration. You may have transmission solenoid issues.
Related articles
2012 Toyota Tacoma vs. 2012 Nissan Frontier: Which One Should I Buy?
The smaller truck category includes those vehicles for men (and women!) who just want to scoot around town but who are opposed to driving a small car and just prefer a truck. These relatively fuel-efficient vehicles offer little in the...
The Best Used Cars to Buy If You're a Carpenter
If If you're a carpenter, and working for someone else, the best used car is whatever you like that gets you to work on time and holds your tools – in short, practically any used car will do. If you...
Essential Things to Know About the Toyota Prius Hybrid Car
The Toyota Prius first came out in 1997. The current Prius gets 58 miles per gallon and can travel a mile without any gas when it's in EV mode.
Browse other content
Services
Estimates