Q: Hard shifting
2015 Mazda6 gears won't catch. Can shift to 1st - 3rd gear, but won't move. Resistance from 4th - 6th gear prevents it from shifting to them.
My car has 15000 miles.
My car has a manual transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
How do I partially turn off the electronic stability control (ESC)?
To partially turn off the electronic stability control (ESC), briefly press and release the “ESC Off” switch on the instrument panel. The ESC Warning Light will illuminate to let you know that the system is partially off.
How do I check the oil?
Checking the oil is easy, and should be done with regularity, so that you’re never driving with unsafe levels of motor oil. Here’s how to check your oil. Wait about five minutes after driving your vehicle. You want the oil...
How does the rear power window switch work?
If you have a sedan, then you have power windows all the way around (coupes only have power windows in the front – the rear windows cannot be rolled up or down). The rear window switch in the Altima is...
ESC lights coming on.
I would ask for help from a mechanic with a scan tool who can read what codes are in the vehicle's computer. These will tell him where to start the diagnosis on your vehicle. The ESC light signals that there...
Brakes, transmission, starter, & catalytic converter replaced, but not fixed
The exhaust would need to have been removed when the transmission was done and may have been installed back on incorrectly or is misaligned causing the popping noise. A popping noise is usually due to a leak in the exhaust...
Brakes locking up
You need to recheck the brake light switch (https://www.yourmechanic.com/services/brake-light-switch-replacement) installation. If it is adjusted incorrectly it could partly hold the brakes engaged and would lock up the brakes or keep them partly engaged. The light switch should not be bottomed...
Oil coming from oil filter
If the filter is not tightened properly the vibrations of engine can work the filter loose over time. If you tightened the filter and it was still leaking that means that there was a problem with the seal on the...
What is making my front end vibrate?
I would first test the motor or transmission mounts. If it is not the motor mounts, the vibration might be arising as engine load and speed "interact" with the gearing at that particular speed causing a dynamic balance issue. The...
Trouble Code P0430, assume it is the catalytic converter. Need parts and labor to R&R.
Hello: P0430 is a generic diagnostic trouble code (https://www.yourmechanic.com/article/p0430-obd-ii-trouble-code-catalyst-system-efficiency-below-threshold-bank-2-by-spencer-clayton) that indicates a malfunction within the catalyst system. It may been seen with misfire codes and oxygen sensor codes. Before you get a quote for replacing the catalytic converter, you may...
Related articles
The Best Used Cars to Buy If You Just Got Your License
If If you are a new driver, congratulations on getting your license. Now, you need to think about what type of vehicle to buy. Ideally, you’ll choose a used car that isn’t overly expensive, and is reliable and safe while...
The Best Used Cars to Buy for Highway Driving
Do Do you spend hours each week on the highway for work? Maybe you just live in a very rural area and have to drive for 30 or 45 minutes to get to the grocery store. Whatever the case, your...
Mazda Certified Pre-Owned (CPO) Car Program
If If you have been shopping for a used Mazda vehicle, you may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on...
Browse other content
Estimates
Maintenance
Cities