Q: 05 ford explorer xlt drivers side fog light what size bolts do I use to replace it

This issue may be related to a malfunctioning crankshaft or camshaft position sensor. These sensors monitor the position of both shafts and send feedback to the PCM (engine computer) which then sends signals to multiple other things such as fuel...

Your engine is an interference motor and will get damaged if the belt breaks. You can contact another mechanic, like one from YourMechanic, who can check and replace the timing belt (https://www.yourmechanic.com/services/timing-belt-replacement) for you.

Hello. It sounds like the clutch slave cylinder (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-clutch-slave-cylinder) may not be working properly or has completely failed. The slave cylinder is what makes it easy for you to manually shift through the gears of the car. When the slave...

I doubt that it is a GDI car. If it's gasoline directed injection, then yes go ahead. Put one on, it is a good idea. You don't need it for a regular Honda - it doesn't really need it -...

Hello. There are several things that could be causing your rough idle condition and therefore there are multiple possible solutions. Carbon buildup inside the intake manifold and valve train is a big cause of rough idle. This can usually be...

The transmission will likely need to be rebuilt or replaced. I would get a quote from a few local shops for a transmission overhaul and then compare this with the car's value (https://www.yourmechanic.com/article/how-to-determine-the-value-of-a-car-by-brady) before and after repairs. Look at some...

It sounds like your problems are isolated to the Brake Assist System which is a system designed to sense panic stop conditions and use vacuum to assist the brake pedal and give you the shortest possible stopping distance. Like the...

The problem sounds like you have a water pump leaking and it can be verified by doing a cooling system pressure test and then locate the leak to see if it is a water pump or the system hoses or...

The problem sounds like the starter is bad and cannot be tested on bench properly for engagement. I recommend getting the starting battery system checked and replace the starter after checking the system for any other issues.