Showing articles & questions for topic
LS460

Related questions

Question
Lexus starts and then stalls.
There are many variables in a no start or starts and dies condition. A car needs 3 basic things to make it run. Air, fuel, and spark. If one of those is missing the magic doesn't happen. Low fuel pressure...
Question
Won't start won't lock
Hey there, thanks for writing in about your 2008 Lexus LS460. This sounds like it is caused by a dead battery. The battery will need to be charged to see if it will accept a charge and then load tested...
Question
ABS Brakes VSC
That is a code for the yaw rate sensor. It may be able to be cleared after a zero point calibration is carried out on the yaw rate sensor with a scan tool capable of resetting the yaw rate sensor....
Question
Battery won't charge
Your 2008 Lexus LS460 may need to be moved to have easier access to the battery. The battery needs to be checked and the starting system operations verified. The battery could be dead, or there could be another problem within...
Question
Brake wear warning light
Hey there, thanks for writing in about your 2011 Lexus LS460. If the light does not clear after several drive cycles then there may be an open in either of the brake pad wear sensor circuits. Continuity of these circuits...
Question
Battery dead in 2 days
Hello. Thanks for writing in about your 2007 Lexus LS460. If the battery is draining that fast you either have a faulty battery or a possible parasitic draw draining the battery down. The battery should be charged and load tested...
Question
I have 2007 LS 460 when driving the highway it will pulsate when brake is applied
The pulsating from the brakes are usually caused by the front rotors which are warped and will vibrate the steering while braking. You should have the brakes inspected and brake rotor run out checked using a dial indicator. You will...
Question
I want to what is the issue if the code number is P0306?
Hello there, many faults will cause a misfire in cylinder 6 with your 2007 Lexus LS460. You have done great in replacing the coil pack as these can defiantly cause the misfire. Other potential causes are the spark plugs, fuel...
Question
Replace camshaft and crankshaft sensor my friend run a test and computer gave him both codes for cam and crankshaft
Hi there: If the two error codes came up prior to the replacement, but the codes were not removed by a digital scanner after the service was completed, the codes will remain. Other possible causes of this issue are electrical...

Need a mechanic?

Our certified mobile mechanics make house calls in over 700 U.S. cities. Fast, free online quotes for your car repair.

Get a quote

Post a question and get free advice from our certified mechanics.


Ask a question