Popular questions

Hi - regarding the crankshaft sensor - if the new one (cheap or otherwise) is not causing any misfire, it is just fine for now anyway. What code is "still coming up"? That is fairly important in the diagnostic process....

The sun visor mirror light will automatically turn on when the mirror is accessed.

Hello. Your power train warranty does cover the hard parts of the power train like the ones that you mentioned. Typically this does not cover the suspension and steering parts as those end at the bumper to bumper warranty period....

The mist wipe feature provides extra visibility when your windshield is temporarily damp, such as when you drive through a misty patch. To use the mist feature, push the Windshield Wiper level down and immediately release.

For this type of work, you will need to call the dealership for help the key instead of the locksmith. They installed your alarm system so they will be able to help you with resetting it or programming your remote...

The MyKeys can be cleared very easily by following these steps: 1. Press the Up/down buttons on the steering wheel until Settings is displayed, then press the OK button. 2. Press the Up/Down buttons until MyKey is displayed, then press...

Hi there. If the tensioner was removed, then when the engine cranked over the camshaft would not move causing the piston to come in contact with the valves. Then there would be a serious problem with the engine. Most likely...

Hi there. The two problems you just described are two of the most common issues that plagued the Ford Explorer since the 2000 model year. The first problem of transmission is caused by the transmission case leaking internal pressure and...

Claimed by Jeff Engstrom

One thing that may have happened if the engine was flooded is that the cylinder walls may have been washed down by excess fuel. Once this happens the engine has a distinctly different sound when starting. Also, even spraying starting...

Weather conditions and the severity of the coolant leak can all be factors as to why over heating occurs. A cooling system pressure test should be performed by a technician in order to pin point the location of the coolant...

Hello. If the car doesn't crank then there is likely an issue with the starting or electrical system. If the issue began after you installed the new battery then the first thing I would do is check the battery to...

The third row cargo light is located above the trunk area of your car, and provides light to the third row of seating, and the trunk. To turn this light on, press the Light On switch next to the light....

The first thing to determine is whether the problem involves the engine, or transmission. If the engine is running rough, or the turbo is not working properly, the engine will be down on power, and will not accelerate as it...

The lane change signals should be used whenever you are changing lanes on the freeway. These signals indicate to your surroundings that you will be changing lanes, by flashing the turn signals three times. To signal a right lane change,...

You can play an external device through your sound system, via the auxiliary jack. To do so, follow these steps: 1. Locate the auxiliary port, which is in the center console. 2. Make sure your device is turned off. 3....

To mute the sound system, simply press the Mute soft key. Press it a second time to unmute the system.

I would ask one of the mechanics at YourMechanic to come to you and replace the broken ball joint so your vehicle will be drivable again. When you book your appointment, be sure to indicate whether it is the front...

Usually when the Check Engine Light flashes, it is an indication that you have a severe misfire that may cause damage to the catalytic converter. Most of the time this is due to failing ignition components. That is why it...

You will need to have a mechanic or dealer that has the correct scanner that can communicate with your vehicle to run the DPF soot clean and reset procedure on your vehicle and reset the soot level to zero to...