Q: What does the Service StabiliTrak message mean?

Hello. The ABS light on the dashboard is an indicator to warn the driver of improper system function. With your symptoms, I believe your anti-lock braking system controller may have a fault. The anti-lock braking system measures wheel speeds and...

If the transmission is not shifting gears even after a fluid service, the problem may be internal transmission failure. I do not suggest driving a vehicle with these symptoms as you risk damage to the engine. You will need to...

There are a lot of inquiries regarding a similar issue with vehicles of your year and model. The linkage connection is made of plastic and will eventually break. A metal safety clip or an extra tie may be used to...

Hello. Code P0340 (https://www.yourmechanic.com/article/p0340-obd-ii-trouble-code-camshaft-position-sensor-circuit-malfunction-by-jamahl-walker) sets due to many possible faults. The sensors themselves have to be tested using an oscilloscope to see if the output waveform meets spec. If the sensors were not tested, there may have been nothing wrong...

Hi, thanks for writing in. The thermostat in the engine cooling system is a valve that opens and closes as engine temperature fluctuates. The purpose of the valve is to keep the engine operating temperature at a relatively constant, optimal...

The starting system is rather simple. The battery, the starter, and the ignition are the only major components. There are a few sensors related to the system that may need to be checked. The first thing you should do is...

It sounds like you may have worn CV joints. the CV joints are the couplings on the end of the axles that allow the wheels to steer while under power. When they are failing they usually make a popping sound...

Hello, thank you for writing in. When it comes to a stalling issues, you want to turn your attention to the spark and power supply first. It is good you have partially ruled out the fuel supply as the problem....

You may have a theft system malfunction. You may also have a shift cable problem also. Try to put car in neutral to see if it cranks? Move shifter back and forth to see if it moves through the gears...