Q: What does the Lane Departure System Unavailable message mean?

It sounds like the problem could be with the blower motor resistor (https://www.yourmechanic.com/services/heater-blower-motor-resistor-replacement). If you only have one speed that the motor works on or the blower motor stops working all together you may need to have this replaced. A...

When you pair a cell phone with HandsFreeLink, your phonebook and call history information will be automatically imported into the system.

The symptoms you describe are most commonly caused by the ignition switch loosing contact to one or more contacts in the switch. I would try and wiggle the ignition key to see if the problem comes and goes. This would...

For the Kia Soul, the low and high fan relays are located in the engine compartment fuse relay panel box. There is also a 30 amp fuse in the same location that powers both relays. The 2008 Hyundai Elantra cooling...

This can happen when the key itself gets worn out making the switch inside inoperable to that particular key. This can also happen when the inside cylinder parts begin to wear out or become inoperable for the same reason. As...

Hello - the lack of fan functionality (https://www.yourmechanic.com/article/what-components-of-the-heating-and-ac-system-are-most-likely-to-fail) in the front only of your van could be caused by either the front fan, the fan control switch or the front fan motor resistor pack failing. If the front fan works...

Hello, thank you for writing in. There are several issues that can occur when it comes to faults with the electronic stability control. If the light has come on, then the first step should be to have the vehicle scanned...

Hello - if the noise (https://www.yourmechanic.com/services/whining-sound-when-car-is-in-gear-inspection) increases with the speed of the vehicle, but only while you are accelerating (as opposed to coasting), the problem is in the drivetrain (transmission or differential). If the noise increases with road speed, whether...

The most important code here is the P0016. This code is telling you that the camshaft and the crankshaft are out of time and that could explain the misfires and the poor performance. The catalyst and the air injection codes...