Q: What does the 4x4 Auto Light mean?

asked by on

What does the 4x4 Auto Light mean?

The 4x4 Auto Light will display when the 4x4 system in on auto mode. The driver can switch the settings of the 4x4 system. To understand the 4x4 Auto Light.

  1. The 4x4 Auto Light will come on when the system is on auto mode.

  2. If the light does not come on, the system is not in auto mode.

  3. If the light does not work properly, have the system serviced.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. What does the 4x4 Auto Light mean?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I was driving my 2012 kia forte when all of a sudden it cut off it was start backup at 1st and run as longest on holding a gas pat

Stalling at idle could be due to a faulty mass airflow sensor, faulty camshaft or crankshaft position sensors, worn spark plugs, wires or defective ignition coil(s), inadequate fuel delivery or pressure (clogged fuel filter, injectors, faulty fuel pump or pump...

Q: I HAVE REPLACED THE SENSOR FOT THE ADVANCETRAC THE NOISE IS GONE BUT LIGHT IS STILL ON WHAT ELSE COULD IT BE

They may not have cleared the faults. If the wheel speed sensor had failed, and they simply replaced it, the faults need to be cleared for the light to go out. If they did clear the faults, and the light...

Q: Dashboard going out

Hi there. Since your issue is intermittent this would lead me to believe you are experiencing a bad connection behind your dashboard. A loose connection between your light bulbs and sockets will cause this problem along with a fault in...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.