☰
GET A QUOTE

Fan dit not come on


Fan dit not come on Mechanic's Assistant: What is the make/model/year of your car? Peugeot(###) ###-####1.4 Mechanic's Assistant: Are you fixing your Peugeot 207 yourself? What have you tried so far? Noting M...

Fan dit not come on Mechanic's Assistant: What is the make/model/year of your car? Peugeot(###) ###-####1.4 Mechanic's Assistant: Are you fixing your Peugeot 207 yourself? What have you tried so far? Noting Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? The engen got very hot

Read More

Responses

Automotive Expert
Hi my name is \*\*\*\*\* \*\*\*\*\* we test the fan itself could you check all the coolant pipes worm up to rule out a water pump issue first.

No
Automotive Expert
ok do you not feel confident doing that.

Yu sms me
Automotive Expert
We can talk on here.

Teiping on phnoe

Im lisning
Automotive Expert
ok if you are not confident checking the coolant pipes could you check the hot air comes out from the inside heater when the engine is worm.

Im in the car now
Automotive Expert
is the engine up to temperature.

I cant check nowIt gost up now
Automotive Expert
Is hot air coming from the vents inside the car.

Almost 80dgreese
Automotive Expert
Good switch the engine off let it cool down and check the cooling fan has not seized.

Almost 90The temp gost tu 90 now
Automotive Expert
Switch it off let it cool down and check the cooling fan has not seized.

I dont ander stand what yu se
Automotive Expert
Do you mean the term "seized"

Om not whih yuWher mast i look
Automotive Expert
Check the fan has not seized when it has cooled down.

Dont anderstan
Automotive Expert
When the engine has cooled down check the fan moves freely.

It movesWhat now
Automotive Expert
Give me a min.

Fine
Automotive Expert
Check or replace the fan switch.

I dont now where it isShow my a foto where it is please
Automotive Expert
Is it the 8 valve or 16 valve 1.4 litre engine.

1.4
Automotive Expert
Yes they did an 8 valve version and a 16 valve version of the 1.4 engine on the 8 valve it is located on the right hand side of the cylinder head with a two pin plug.

Just tel me where top or bownRigth or left
Automotive Expert
uper right hand side as you look at the engine.

Oky well check thanx
Automotive Expert
Bridge it with a spare piece of wire and see if the fan starts.

The fan start if we do thatBut i dont like that
Automotive Expert
You will need to take it to a garage then.

Oky i will do thatEnjoy yore day thanx a lot
Automotive Expert
No problem regards Gavin.

Still not sure what you need?

Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.

Get a Diagnostic

Top Questions

Trending Topics

What others are asking

Burning smell from under the hood
Hello. A lot goes on under the hood and many of the components can reach high temperatures. Any fluid leaks coming into contact with these hot components can burn the fluids and cause an odor. An example would be a...
Read more
Car starting, but not going into gear
The transmission leak would have to be located and fixed then the transmission fluid filled to see if internal damage has been done to the transmission. The leak could be from the transmission or transmission cooler. Once the leak is...
Read more
Replaced battery/alternator, but car won't start; if it's the electronic control unit, need instructions to find & replace it
Before you go replacing any additional components I would suggest calling a mechanic, like one from YourMechanic, to come to you and diagnosis the no start problem (https://www.yourmechanic.com/services/car-is-not-starting-inspection) for you. It will save you from guessing on what is the...
Read more
Burns a quart every 1500 miles
Your engine oil usage is considered normal when you ask a dealer or manufacturer. They will tell you that one quart for every 750 miles is considered okay by their standards. Has your Accord always used this much oil, or...
Read more
Lights, radio, windows not working, SRS light on, car runs very rough
This is likely either a dead battery (https://www.yourmechanic.com/services/battery-replacement) or a battery connection (https://www.yourmechanic.com/services/battery-cable-replacement) problem. Try checking (https://www.yourmechanic.com/article/how-to-check-a-car-battery) the battery ground (black cable opposite end of the battery connection) to be sure is properly connected to the chassis of the car....
Read more
Car is easy to put in gear, but won't move. It can be pushed so no wheel or break lockage. Transmission fluid is very dark
Hi there, thanks for writing in. Odds are high that the transmission has failed. "Dark" fluid indicated a lot of clutch pack material has worn. Also, this can cause the pump to fail inside the transmission. Flushing the fluid at...
Read more
My car's engine runs rough at idle - 2001 Chrysler Voyager
Hi there. From what you've described/shown, it seems that the mechanic put the timing belt back on one tooth off. If all of a sudden the engine is not running correctly and the vacuum has dropped, then a valve is...
Read more
I have a Code P0601 on the PCM. I replaced the PCM, and now I have a code P0118, code P0123, and code P0193.
Hi there, the short answer to your question is no . A PCM with a P0601 (https://www.yourmechanic.com/article/-p0601-obd-ii-trouble-code-internal-control-module-memory-check-sum-error-by-spencer-clayton) (which is a memory module error in the PCM) cannot reliably retrieve codes for the codes you list (P0118 (https://www.yourmechanic.com/article/p0118-obd-ii-trouble-code-engine-coolant-temperature-ect-sensor-circuit-high-open-problem-by-jay-safford) - coolant temp...
Read more
wheel hot to touch and smell like something is burning
Hi there: In most cases, this is a sign of a dragging emergency brake, faulty brake pressure issue or wheel bearings that are damaged. If you jack up the rear of the vehicle and your wheel spins freely, then it...
Read more

Browse other content

Cities
Maintenance
Estimates
Services