Q: The AWD disable light is on in my 2006 Buick Rendezvous

asked by on November 07, 2016

I have a 2006 buick rendezvous and the AWD disable light stays on while I drive. I took it to auto zone and they didn't get any codes so there wasn't anything wrong with the car. Also, when i turn it makes a sqeaking sound. What may be happening?

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

One rear wheel warmer than the other, making scraping squeaking noise, started to vibrate when going faster
Hey there. It sounds like the hub may not have been pressed all the way into the bearing on installation. It's an easy mistake to make. Pressing in the hub takes a tremendous amount of force so it's sometimes hard...
When turning on the key I hear a loud click from under the hood but it won't start the engine.
This is a common sign of a faulty starter solenoid. The starter solenoid is located on the starter and has internal electrical contacts that transmit electricity to the starter. When this fails, it may cause a clicking sound and will...
My car Roaring when I accelerate
Hello. Thanks for writing in. To begin, we need to identify what kind of noises you are hearing. Does it sound like a squeak, ticking, grinding, or tapping? Vehicles will make different noises when the engine is cold. Sometimes these...
how often do i change my oil
My service manual says to change oil and filter every 13,000 miles or 12 months. You should verify this in the owners manual and with a local dealer just to verify.
Brand new wiper motor keeps blowing the fuse.
If the wiper switch is in the "off" position and yet the fuse protecting the wiper circuit blows when you turn the ignition system on, there may be something wrong with the wiper switch itself in combination with a short...
2012 Ford Flex inner tie rod torque spec please.
For hydraulic assist steering tighten inner tie rod to 77 ft. lbs. If steering is electric assist then tighten to 66 ft. lbs.

Related articles

P0021 OBD-II Trouble Code: Camshaft Position A - Timing Over-Advanced or System Performance (Bank 2)
P0021 code definition Camshaft Position A - Timing Over-Advanced or System Performance (Bank 2) What the P0021 code means P0021 is the...
P2070 OBD-II Trouble Code: Intake Manifold Tuning (IMT) Valve Stuck Open
P2070 code definition Intake Manifold Tuning (IMT) Valve Stuck Open What the P2070 code means When trouble code P2070 sets, the engine...
P0477 OBD-II Trouble Code: Exhaust Pressure Control Valve Low
P0477 code means that the PCM has detected an abnormally low voltage reading often due to the exhaust back pressure control valve circuit.