Q: Problems with ABS

asked by on

The ABS light is on, and the odometer stopped working.

The odometer most likely stopped because there is a problem with the vehicle speed sensor. This sensor tells the computer how fast and how far the car is going, so it knows how many miles to count on the odometer. This problem will likely cause the ABS Light to come on as well. I would ask for assistance from one of the mechanics at YourMechanic, so they can diagnose the cause of the ABS Light.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Problems with ABS

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Oil light goes off and on.

This light will usually come on when one of two things are happening. Either the motor is in fact low on oil or the oil pressure sending unit is not working properly and may be producing a faulty reading. I...

Q: How do you use the trip A/B function in the message center?

The trip A/B function in your car’s message center is the same thing as the dual trip odometers on a model without the message center. These are separate odometers designed to let you track the mileage and the time on...

Q: Transmission slow to engage into 1st from stop

Hello. This may be a sign of a faulty transmission control solenoid. Modern automatic transmissions use pressurized hydraulic fluid to change gears. Every time a gear change is required, the car's computer activates a transmission solenoid, which directs transmission fluid...

Related articles

How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.