Q: Power steering stiffness after brake work

asked by on November 06, 2016

i have a nissan tiida/2012 model, i am from dubai.last week i went an auto mobile work shop to change the brake disc, that time they told me no need to change they will grind the disc and put it back.after that i feel stiffness/hardness on my steering.my steering is fully electric electric power steering.why it happen like this?

My car has 65000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

How do the active head restraints work in a 2012 Toyota RAV4?

Your car is equipped with active head restraints. These are much more than mere headrests designed to make you more comfortable while driving or riding. They’re actually part of your car’s safety system and activate during rear end collisions. Here’s...

How do I clean the sun roof seal?

If your power sun roof is having a hard time opening or closing, or is making strange noises while doing so, it’s a good idea to clean it. This will increase the health and life of your sun roof. To...

My car stalls and my injectors stop spraying 1998 Nissan Sentra

Hello. If your car is stalling and it stops spraying fuel then most of the time this is caused by a failure in the crank position sensor. This is a common issue on this vehicle. When it fails the computer...

just had a clutch kit put in hearing throwout bearing

Hi there. From the description you have provided, you have a warrantable problem with the throw-out bearing, given the clutch kit was installed a day ago. It could be, something was installed incorrectly. It could be, the throw-out bearing was...

How do I open, lock and unlock the glove box?

You can store important items in your glove box to keep them safe by locking it. You just press open the latch on the glove box to access items inside. Use the mechanical key or the master key and insert...

The vehicle makes a sound when turning.

Hi there. The power steering pump will take about 2 to 5 hours to replace depending on the person who is replacing it if they have experience in replacing the part from that particular vehicle. Billing question was sent to...

Doorlock and door opener broken

It sounds like the door latch needs to be removed and replaced. The door latch and locking mechanism are built into the same part and can easily be replaced. I would recommend having a technician from YourMechanic come out and...

How do I set or cancel the speed door locking feature?

When the speed door locking feature is turned on, then your vehicle’s doors will be locked when the car eclipses 12 mph. You can turn on or turn off this feature with just a few quick steps: Turn the...

My car had a clicking noise on startup. I replaced the timing chain, guides and tensioners but the noise is still there.

Many engines will make a small ticking sound upon startup when cold due to the fact that the engine oil has dripped down to the oil pan or the bottom of the engine. When the engine starts up, oil pressure...

Related articles

How Do I Know If My Brakes Need Replacing?
Certain symptoms tell you when to replace car brakes. The Brake Warning Light and squeaky brakes are common signs of worn out brake pads or rotors.
How to Buy a Good Quality Power Steering Pump
Power Power steering is what makes an ordinary driving experience extraordinary by adding to the power you apply to the steering wheel and making it simpler to turn the wheel. The power steering pump is the secret weapon in this...
A Buyer’s Guide to the 2012 BMW 1-Series
The The 2012 BMW 1-Series, which includes both the 128i and the 135i in both a coupe and convertible options, provides the perfect combination of power, performance and luxury. Designed with a focus on thrilling acceleration and a smooth, elegant...